- Now you need to remove the ‘frame’ from the back of your Philips Hue Smart Wireless Dimmer Switch. This is the bit you normally screw or stick to the wall. There are four tabs around the edges to remove the frame. Pop each of these and the frame will come off. You can discard it.
- Place the now frameless cover on top of the Samotech SM200 Light Switch Cover. It should snap in firmly.
- Switch the power back on and test!
You’re done!
It’s really simple to replace Light Switches with Philips Hue Switches, and the result looks pretty good too! You can also remove the Philips Hue Switch from the holder and use it as a remote control too! If you ever need to access the original switch you can just quickly pop off the Philips Hue Switch cover with a small screwdriver for access.
There you have it! A quick and easy way to replace Light Switches with Philips Hue Switches!
Have you taken the Philips Hue plunge yet? What do you think of this solution? Drop a comment below!
Disclaimer – The links in this post are affiliate links, if you make a purchase using them, I’ll receive a small percentage.
- 1
- 2
Hi there. You replaced a two switches with one dimmer. how do you control the second light?